Blog
Follow our innovations and technological solutions.
Blog
The Sanding Revolution with Self-Sharpening Minerals
The 3145 TRIDENT delivers consistent and precise results, allowing you to work faster and with higher quality.
Read moreBlog
Proper Surface Preparation – Tips and Tricks for a Flawless Final Finish
Proper surface preparation ensures good adhesion, smoothness, and a long-lasting final coat by following key steps.
Read more
Blog
Winter vehicle painting: challenges, adjustments, and solutions
Winter conditions make vehicle painting challenging, but with adjustments and careful preparation, excellent results can be achieved.
Read moreBlog
Why are powder-free gloves the best choice for your safety?
When it comes to hand protection in professional environments, choosing the right gloves is essential.
Read more
Blog
Using the right hardener
One of the most common mistakes in car paint workshops is the incorrect selection of hardeners when preparing two-component systems.
Read moreBlog
Proper use of putty
The first mistake when using putty can be made as soon as the container is opened and liquid is visible on the surface of the putty.
Read more
Blog
Masking the vehicle (EN)
Applying paper and tape to a vehicle to protect it from overspray may seem basic, but a poor masking job can adversely affect the quality of the paint job and increase the need for rework.
Read moreBlog
Saves 50% of the time. (EN)
With direct-to-plastic you can save up to 50% of the time needed for plastic part repair.
Read more
Blog
What is a SMART REPAIR? (EN)
A “SMART REPAIR” is a very common expression in the automotive sector. What is it about?
Read moreBlog
Meet Rachel, our brand ambassador (EN)
Rachel shows passion in what she is doing and is a great example for new technicians entering the industry.
Read more
Blog
How to restore your Headlights
The kit can be used for restoring all types of vehicle headlights and prolonging their lifespan, or it can be applied as extra protection for new car headlights.
Read moreBlog
5 BODY SHOPS PRECAUTIONS IN RESPONSE TO CORONAVIRUS (EN)
As travel options such as flying and public transportation are becoming limited, people are even more dependent on their vehicles for work and to take care of their daily lives. Here are 5 precautions to take in your auto body repair shop to prevent spreading of the virus.
Read more
Blog
COATINGS INDUSTRY TRENDS
Although the use of coatings for new cars has been declining for 2 years, the use of paint materials has been increasing in recent years.
Read moreBlog
Business cup 2020
Our team participated in the "Business Cup" futsal tournament and among strong competition from all over Slovenia (14 teams), with 2 out of 4 wins ended at 5-8th place.
Read more
Blog
Paint Booth Maintenance Tips
Improper paint booth care can contribute to costly downtime, hazardous working conditions and increased cost of repairs.
Read moreBlog
Five keys to protect the car paint in autumn
The arrival of autumn is increasingly evident. Rains, dry leaves and wind can compromise the state not only of the roads, so we all have to take care of our driving in the fall , but also affect our cars , especially the body.
Read more
Blog
Use of an appropriate hardener and thinner
Are the results of your work ever not as promised? Do you think the result is not the same as yesterday?
Read moreBlog
The Importance of the Mixing Ratio in Two-Component Systems
Regardless of whether it is a primer filler, transparent lacquer or any other two-component system, the prescribed mixing ratios must always be consistently complied with when preparing the material.
Read more
Blog
Masking the vehicle (EN)
Applying paper and tape to a vehicle to protect it from overspray may seem basic, but a poor masking job can adversely affect the quality of the paint job and increase the need for rework.
The masking products are applied to the vehicle to protect areas from the paint that will be applied. The area to be painted should never be contacted or overlapped by the tape or paper as this will lead to edge lifting of the new coat of paint. A painter must always use good judgment when masking because a poor job in masking the vehicle will lead to a poor-quality finish.
TIPS:
- Always mask the driver's door separately so that it can be opened if the vehicle must be moved.
- Mask with unmasking in mind. If you mask in such a way that unmasking is like unraveling a thread, you’ll not only save time unmasking but also because there won’t be a thousand pieces of tape and paper on the floor to pick up.
News
Develop the future together with us.
Become our partner.
To all our distributors Silco guarantees longterm partnership agreement, pre-defined customer protection, technical and commercial training, localized technical documentation.
Contact us
